MOTO | CYCLE | ROAD

Apex / Apex 35

The Renthal Apex combines All Mountain strength, Enduro stiffness and XC lightweight.

Unique 240° handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars.

The Apex is fully CNC machined, featuring an oversize centre bore, extensive 3D machining and external webbing to maximise structural strength and stiffness and minimise weight.

Handlebar Clamp

Handlebar Clamp

The clamps are installed over the small diameter section of the handlebar and slid into the centre, giving a 240° wrap of the handlebar. The zero-gap lower clamp ensures maximum support of the handlebar, in this critical zone.
Steerer Clamp

Steerer Clamp

The V2 Apex steerer clamp is side mounted which give a clean rear profile to the stem and removes any sharp edges. The angled steerer clamp screws, tangential to the steerer tube, give much more efficient clamping, for a higher clamping load.
Forged and CNC Machined

Forged and CNC Machined

The V2 Apex stem is manufactured from forging and then CNC machined. All unnecessary material is removed to minimise weight, whilst retaining maximum strength and stiffness. The unique handlebar clamping system opens up the front of the stem, allowing intricate machining of the stem body internals, to increase stiffness and strength and reduce weight.
Aluminium Tech

Aluminium Tech

The Renthal V2 Apex is forged and CNC machined from 2014 aluminium with 7050 aluminium clamps. These materials and their heat treatment processes have been specifically chosen for this application, to give the highest strength and durability.
Race Winning

Race Winning

The V2 Apex is the improved evolution of the V1 stem, which carried riders to nine overall EWS series titles, 72 individual EWS race wins and a World Championship.

Accordion

The clamps are installed over the small diameter section of the handlebar and slid into the centre, giving a 240° wrap of the handlebar. The zero-gap lower clamp ensures maximum support of the handlebar, in this critical zone.

The V2 Apex steerer clamp is side mounted which give a clean rear profile to the stem and removes any sharp edges. The angled steerer clamp screws, tangential to the steerer tube, give much more efficient clamping, for a higher clamping load.

The V2 Apex stem is manufactured from forging and then CNC machined. All unnecessary material is removed to minimise weight, whilst retaining maximum strength and stiffness. The unique handlebar clamping system opens up the front of the stem, allowing intricate machining of the stem body internals, to increase stiffness and strength and reduce weight.

The Renthal V2 Apex is forged and CNC machined from 2014 aluminium with 7050 aluminium clamps. These materials and their heat treatment processes have been specifically chosen for this application, to give the highest strength and durability.

The V2 Apex is the improved evolution of the V1 stem, which carried riders to nine overall EWS series titles, 72 individual EWS race wins and a World Championship.

Sort By:

Show:

Apex35 33mm - V2 Stem

Apex35 33mm - V2 Stem

Apex35 33mm - V2 Stem

$150.00 Ex Tax: $150.00

Apex35 40mm - V2 Stem

Apex35 40mm - V2 Stem

Apex35 40mm - V2 Stem

$150.00 Ex Tax: $150.00

Apex35 50mm - V2 Stem

Apex35 50mm - V2 Stem

Apex35 50mm - V2 Stem

$150.00 Ex Tax: $150.00

Apex 31mm - V2 Stem

Apex 31mm - V2 Stem

Apex 31mm - V2 Stem

$150.00 Ex Tax: $150.00

Apex 40mm - V2 Stem

Apex 40mm - V2 Stem

Apex 40mm - V2 Stem

$150.00 Ex Tax: $150.00

Apex 50mm - V2 Stem

Apex 50mm - V2 Stem

Apex 50mm - V2 Stem

$150.00 Ex Tax: $150.00

Name	Part Number	A	B	C	D	E	F		Prices From:	Purchase
Apex35 33mm - V2 Stem	STM126	-	-	-	-	-	-	AluGold/Black, Black/Black	$150.00 Ex Tax: $150.00
Apex35 40mm - V2 Stem	STM127	-	-	-	-	-	-	AluGold/Black, Black/Black	$150.00 Ex Tax: $150.00
Apex35 50mm - V2 Stem	STM128	-	-	-	-	-	-	AluGold/Black, Black/Black	$150.00 Ex Tax: $150.00
Apex 31mm - V2 Stem	STM123	-	-	-	-	-	-	AluGold/Black, Black/Black	$150.00 Ex Tax: $150.00
Apex 40mm - V2 Stem	STM124	-	-	-	-	-	-	AluGold/Black, Black/Black	$150.00 Ex Tax: $150.00
Apex 50mm - V2 Stem	STM125	-	-	-	-	-	-	AluGold/Black, Black/Black	$150.00 Ex Tax: $150.00
		Dimensions Explained

handlebar dimensions

Showing 1 to 6 of 6 (1 Pages)