Unfortunately due to technical issues we are currently unable to fulfil online sales orders. While we resolve this issue please support your local Renthal dealer/stockist. We apologise for this inconvenience we thank you for your patience.
  • Integra 45mm / +10 rise

Integra 45mm / +10 rise


  • $140.45

  • Ex Tax: $140.45
  • Product Code: STM108-BKAG
  • Availability: In Stock

This item is currently unavailable for purchase from renthal.com


Product Description

Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, whilst maintaining an incredibly stiff and strong structure.

The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.

Features

  • CNC machined 6082 aluminium body 7075 aluminium clamps
  • Unique 240deg C-shape clamps
  • Minimal 6-bolt design
  • U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems
  • Ultra-wide 64mm clamp width 

Write a review

Note: HTML is not translated!
    Bad           Good
Stem Specification
Offset 45mm
Rise +10mm
Mounting Boxxer/Fox IS
Clamping Diameter 31.8mm
Weight 159g (inc. bolts)


Accordion
The clamps are installed over the small diameter section of the handlebar and slid into the centre, giving a 240° wrap of the handlebar. This clamping system allows the stem body material to be reduced to a minimum, whilst maintaining an incredibly stiff and strong structure.
twinwall
The Integra stem is fully CNC machined from solid billet. All unnecessary material is removed to minimise weight, whilst retaining maximum strength and stiffness. The unique handlebar clamping allows full access to the stem body, to machine away all unnecessary material.
twinwall
The Renthal Integra features a fully CNC machined 6082 T6 aluminium body and 7075 clamps. The materials and their heat treatment processes have been specifically chosen, to give the highest strength to weight ratio.
twinwall
Steel hardware is a major factor in the weight of a stem. The Integra has reduced the required hardware to just six bolts, instead of the normal eight, to vastly reduce overall weight. Combined with a single piece stem body, the 64mm clamp width gives superior strength and structural stability. This increases control, without the need to add large amounts of material and hence weight
twinwall
The Renthal Integra has already gained cult status, as the stem of choice for World Cup downhill. Four World Cup overall championships and seven World Championship gold medals have been won using the Integra, cementing it as one of the most successful race products of all time.
twinwall